Important: Your continued use of this forum indicates acceptance of the forum rules. Please make sure you have read and understand these rules.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Squonk me baby....
SirPrize Offline

Posts: 81
Likes Given: 1
Likes Received: 19 in 15 posts
Joined: Dec 2014
Reputation: 1
Sex: Male
Location: London

Thread Starter

Post: #11
RE: Squonk me baby....
(20/05/17 10:03 AM)keepitgoin Wrote:  I use the same wire (Kanthal) in the same gauge all the time (26/28 awg) so I know if I put 8 wraps around a 2.5mm rod/screwdriver then it'll always come out between 1.2 and 1.4 oHms.
Kanthal is xxxoHms resistance per inch (resistance per inch differs according to the thickness of the wire). so if you use the same thickness (gauge) of wire then you can be pretty confident at what the resistance should be. BUT always check oHms before firing!!!!!!!!

Noted - thank you Bowing

"You are meddling with powers you cannot possibly comprehend" ReadingSmiley
20/05/17 11:08 AM
Find all posts by this user Like Post Quote this message in a reply Return to top
Post Reply 

User(s) browsing this thread: 1 Guest(s)